Használati útmutató Master Lock X031ML Széf

Használati útmutató

2

Bolt-Down Instructions

To help provide maximum security, it is highly recommended

that you bolt down your safe.

1

Set the safe in the place you intend to bolt it down and open the

door.

2

Using a pencil mark the floor through the holes provided in the

bottom or back of your safe.

3

Move the safe away and drill holes of the appropriate diameter

and depth for the type of hardware being used and the mounting

surface.

4

Place the safe back over the holes and install the fasteners as

required.

Note: It is not recommended to attempt to bolt your safe to

both the floor and wall. If bolting to a wall, please ensure the

safe is resting on a supporting surface such as a table or shelf.

Thank you for choosing Master Lock to store all your important documents and valuables.

We hope that this product will help you stay organized and provide you with the peace-of-mind of knowing the things most important to you are protected.

Security Safe

For Key Lock Safes

Your Master Lock product is equipped with a high security key lock.

Two (2) keys are provided.

For Digital Combination Safes

Opening Your Safe for the First Time (Using the Override Key)

1

Remove the cover located between the knob

and keypad.

2

Insert the override key provided and turn

counterclockwise.

3

Turn the knob clockwise to open the door.

4

Turn key back clockwise to remove the key and replace the cover

on the door.

Note: In an emergency, situation the safe can be opened using your

override key. DO NOT store your override key inside the safe.

Installing the Batteries

1

With the door open, remove the battery compartment cover located

on the inside of the door by sliding the cover in the direction of the

arrow.

2

Install four (4) AA size alkaline batteries.

Note: Follow the polarity (+/-) markings in the battery

compartment to ensure proper installation.

3

Slide the battery cover back into place.

Note: Do not use rechargeable batteries or

any other type of non-alkaline battery. Do

not mix old and new batteries. Do not mix

alkaline and other battery types.

Using Your Security Safe

IMPORTANT: All security safe models initially work using the

factory code 1-7-5-0-0 -#. It is highly recommended and important

to the security of your valuables that you re-program the safe with a

new user code. Once reprogrammed the factory code can no longer be

used to open your safe.

Programming Your New User Code

1

Open the safe’s door and remove the battery compartment cover.

2

Locate the button inside the battery

compartment and press.

The yellow LED light will go on.

3

Enter a new user code (between 2-8

digits) followed by the “#” key. The

yellow LED light will go off to indicate

the new code has been accepted and

stored.

4

Replace the battery compartment cover.

Note: Always test a new code before storing any valuables

inside the safe.

Unlocking Your Safe

1

Enter your factory code or user code followed by #.

2

The green LED light will go and remain on for 5 seconds.

3

Within 5 seconds, turn the knob clockwise and pull open

the door.

Locking Your Safe

1

With the bolts retracted into the door, firmly close the door of

the safe.

2

Turn the knob in the counter-clockwise direction to secure your

safe.

THE PROBLEM: WHY IT IS HAPPENING: THE SOLUTION:

A red LED light goes on when a button is

pressed.

Battery power is low. • Install four (4) new AA size alkaline batteries.

• Open with override key.

Digital lock is unresponsive when attempting

to press in code.

Battery power is low. • Install four (4) new AA size alkaline batteries.

• Open with override key.

5 beeps and a yellow LED light after entering

your code.

Invalid code. • Wait one minute and retry your code.

• Open with override key.

Troubleshooting

:

masterlock.eu/safes

ENGLISH

Értékelés

További információ erről a kézikönyvről

Megértjük, hogy jó, ha van egy papíralapú kézikönyv a Master Lock X031ML Széf-hoz. A kézikönyvet bármikor letöltheti weboldalunkról, és saját maga is kinyomtathatja. Ha szeretne egy eredeti kézikönyvet, javasoljuk, hogy lépjen kapcsolatba a következővel: Master Lock. Esetleg tudnak adni egy eredeti kézikönyvet. Más nyelvű kézikönyvet keres Master Lock X031ML Széf készülékéhez? Válassza ki a kívánt nyelvet a honlapunkon, és keresse meg a modellszámot, hátha elérhető.

Műszaki adatok

Master Lock Széfek összes kézikönyve
Széfek további kézikönyvei

Gyakran Ismételt Kérdések a következővel kapcsolatban: Master Lock X031ML Széf

Ügyfélszolgálati csapatunk keresi a hasznos termékinformációkat, és válaszol a gyakran ismételt kérdésekre. Amennyiben pontatlanságot talál a gyakran ismételt kérdésekben, a kapcsolatfelvételi űrlapon jelezze nekünk a hibát.

Kapcsolódó termékek

Használati útmutató

Master Lock X055ML Széf

Használati útmutató

Master Lock 5441EURD Széf

Használati útmutató

Master Lock X041ML Széf

Használati útmutató

Master Lock X075ML Széf

Használati útmutató

Master Lock X125ML Széf

Használati útmutató

Yale YSV/170/DB1 Széf

Használati útmutató

Rottner Samoa 85 Széf

Használati útmutató

Dometic MD 493 Széf

Kapcsolódó kategóriák