Használati útmutató Bionaire BOH2503D Hősugárzó

Használati útmutató

BOH2503D

Fig. 1

Fig. 2

A

B

C

E

F

G

Q

H

I

J

F

C

F

C

Fig. 3

D

Q

G

P

R

S

T

4 5

PLEASE READ AND SAVE THESE

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic safety

precautions should always be taken including

the following:

1. Before connecting the heater, check that the

voltage indicated on the rating plate

corresponds to the main voltage in your

home/office.

2. WARNING: In order to avoid

overheating, do not cover the heater ( )

Reference to product.

3. DO NOT position the heater directly under

a power socket.

4. DO NOT use this heater in the immediate

surroundings of a bath, a shower or a

swimming pool.

5. If the supply cord or plug is damaged, it must

be replaced by the manufacturer or its

service agent or similarly qualified person in

order to avoid hazard. The heater contains

no user serviceable parts. Should the

product suffer damage or breakdown, it must

be returned to the manufacturer or their

service agent.

6. Under the environment with electrical fast

transient, the product may malfunction.

7. DO NOT use this heater with a programmer,

timer or any other device that switches the

heater on automatically, since a fire risk

exists if the heater is covered or positioned

incorrectly.

8. Only touch the heater with dry hands.

9. DO NOT use this heater outdoors.

10. DO NOT position where it can be touched by

children, especially the very young.

11. Allow a safe area around the heater away

from furniture or other objects; at least 50 cm

from the top and sides and 200 cm at the

front. The heater is to be placed at least 3m

from water source.

12. DO NOT use this heater when it is lying on

its side.

13. DO NOT use the heater in rooms with

explosive gas (e.g. petrol) or while using,

oxygen, inflammable glue or solvent (e.g.

when gluing or varnishing parquet floors,

PVC etc.)

14. DO NOT insert any objects into the heater.

15. Keep the mains cord at a safe distance from

the main body of the heater.

16. If overheating should occur, the built-in

overheating safety device will switch off the

heater.

17. DO NOT place the cord under a rug.

18. The heater cannot be used adjacent to

curtains or combustible material. Curtains

or combustible material may be burned if

the heater was installed incorrectly.

19.This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

Children should be supervised to ensure that

they do not play with the appliance.

20. This heater is filled with a precise quantity of

special oil. Repairs requiring opening of the

oil container are only to be made by the

manufacturer or his service agent who

should be contacted if there is an oil leak;

21. When scrapping the heater, follow the

regulations concerning the disposal of oil.

DESCRIPTIONS (See Fig. 1, 2 & 3)

A. Heated Fins

B. Vents

C. Pull down handle

D. Power switch

E. Cord Storage

F. Power cord

G. Front castor assembly

H. Digital display

I. Power light

J. Mode light

K. Timer light

L. Mode button

M. Thermostat/timer button

N. Adjuster buttons

O. °F · °C button

P. Front wing nut

Q. Castor

R. Rear castor assembly

S. Rear wing nut

T. U-bolt

Technical Specifications

BOH2503D, Wattage: 2500W

ASSEMBLY INSTRUCTIONS (See Fig. 3)

Please make sure the heater has not been

plugged into any electricity outlet.

Carefully remove heater from box. Some

accessories are packed internally. Please make

sure you have all of the following accessories

prior to throwing away packaging.

2 Castor assemblies with four castors (R, G, & Q),

and 2 U Bolts with wing nuts (T, P, S).

Note: This unit is for FLOOR USE ONLY.

ENGLISH

1. Turn the heater upside down and you will see 2

U-bolts (T) with wing nuts over the first and last

joint of the heater.

2. Unscrew the wing nuts (S & P) from the

U-bolts (T).

3. Start with the front of the unit and place one

hole of the front castor assembly (G) to the L

shape of the U-bolt (T) and the other hole of

the castor assembly into the other end of the

U-bolt, then screw on the wing nut (P).

4. Repeat step 3 for the rear castor assembly,

using wing nut (S) instead of wing nut (P) and

rear castor assemblies (R).

5. Use your hand to press the four castors (Q)

onto the four axes of the two foot plates until

you hear them click into place. Use your hand

to turn the castors and if they move smoothly

they have been installed properly.

6. After installation of the front and rear castor

assemblies and the castors turn the heater the

right way up: the heater is now ready for use.

NOTE: Make sure when assembling that the

castor assemblies with wheels are pointing

outwards for maximum stability.

OPERATING INSTRUCTIONS

(See Fig. 1 & 2)

1. Ensure the power switch (D) is set to the OFF

(O) position.

2. Plug in heater.

3. Flip the power switch to the ON (-) position.

The power light (I) will illuminate red until the

unit is unplugged.

4. Press the mode button (L) once to activate

the unit. The mode light (J) will glow green to

indicate the heater is running. The unit will

automatically start on Setting 3 (High Heat).

5. Press the mode button until the desired heat

setting is shown on the digital display (H).

BOH2503D: 3=2500W, 2=1300W, 1=1200W,

=Energy Saving Mode

After using the heater, press the mode button

until the unit is deactivated and the mode light

turns off, then turn the power switch to the OFF

position. Unplug the the heater from the socket.

SETTING THE THERMOSTAT

1. Set the desired heat setting by pressing the

mode button.

2. Press the thermostat/timer button (M) once to

activate thermostat setting. The room

temperature and a thermostat icon flash on the

display.

3. Press the + or - adjuster buttons (N) to select

the desired temperature. (Range 12° C - 30° C)

4. The thermostat symbol will stop flashing. The

thermostat control will now automatically

maintain the preset temperature level by

turning the heater on and off.

5. To deactivate the thermostat setting, press the

thermostat/timer button continuously until the

thermostat symbol does not appear on the

display.

NOTE: The Power light will remain lit during

operation.

NOTE: It is normal for the heater to cycle ON

and OFF as it maintains the preset

temperature.

FROST GUARD INSTRUCTION

When the heater is in frost guard mode, the

temperature will be maintained at 5° C; thus the

heater will be in the off status unless the room

temperature is lower than 5° C. If the room

temperature is lower than 5° C, the heater will

automatically start working and will keep turning

on & off all the time, maintaining its ambient

temperature of 5° C. To activate, press the mode

button to turn the unit on, then press the

thermostat/timer button twice. The ( ) icon will

display to indicate that frost guard is activated.

USING THE TIMER

Programmable timer

The user can programme the heater to turn

OFF after a selected period or to come ON

at a preset time.

Setting the OFF timer

1. Select the mode and temperature you want

the heater to run.

2. Press the thermostat/timer button 3 times.

The OFF timer icon flashes.

3. Using either the (+) or (-) adjuster buttons,

programme the heater to turn off up to 24

hours later, in increments of 1 hour.

4. After setting the time, the digital display will

stop flashing to show the timer is activated.

The timer will count down until the

predetermined length of time has passed, and

the heater will then automatically switch off.

Setting the ON timer

1. If the heater is on, press the thermostat/timer

control button 4 times. The ON timer icon flashes.

2. Using either the (+) or (-) adjuster buttons,

Example - Switch OFF - The time is 1 pm.

The heater is running and you require the

heater to switch off at 10 pm; therefore, set

the time to 9 hours.

Example - 9 hours

K

L

M

N

O

BOH2503D-I_IB_REV.qxd:BPH1515I06MLM1.qxd 5/12/10 10:07 AM Page 3

Értékelés

További információ erről a kézikönyvről

Megértjük, hogy jó, ha van egy papíralapú kézikönyv a Bionaire BOH2503D Hősugárzó-hoz. A kézikönyvet bármikor letöltheti weboldalunkról, és saját maga is kinyomtathatja. Ha szeretne egy eredeti kézikönyvet, javasoljuk, hogy lépjen kapcsolatba a következővel: Bionaire. Esetleg tudnak adni egy eredeti kézikönyvet. Más nyelvű kézikönyvet keres Bionaire BOH2503D Hősugárzó készülékéhez? Válassza ki a kívánt nyelvet a honlapunkon, és keresse meg a modellszámot, hátha elérhető.

Műszaki adatok

Bionaire Hősugárzók összes kézikönyve
Hősugárzók további kézikönyvei

Gyakran Ismételt Kérdések a következővel kapcsolatban: Bionaire BOH2503D Hősugárzó

Ügyfélszolgálati csapatunk keresi a hasznos termékinformációkat, és válaszol a gyakran ismételt kérdésekre. Amennyiben pontatlanságot talál a gyakran ismételt kérdésekben, a kapcsolatfelvételi űrlapon jelezze nekünk a hibát.

Kapcsolódó termékek

Használati útmutató

Bionaire BOH2001W Hősugárzó

Használati útmutató

Bionaire BFH910 Hősugárzó

Használati útmutató

Bionaire BFH410 Hősugárzó

Használati útmutató

Bionaire BOH2003 Hősugárzó

Használati útmutató

Bionaire BOH2001 Hősugárzó

Használati útmutató

Bionaire BFH251 Hősugárzó

Használati útmutató

Bionaire BOH1503 Hősugárzó

Használati útmutató

Bionaire BFH400 Hősugárzó

Kapcsolódó kategóriák