Használati útmutató Timex TW2U90900VQ Waterbury Karóra

Használati útmutató

1

ENGLISH 222-095001

Congratulations on purchasing your TIMEX

®

watch. Please read these

instructions carefully to understand how to operate your Timex timepiece.

Your watch may not have all of the features described in this booklet.

For more information, please visit: Timex.com

HOW TO START YOUR WATCH

To start your watch remove the plastic guard from under the crown, then press

the crown in against the case. The second hand will begin advancing in one-

second intervals.

Some deep-depth water-resistant watches require the setting crown to be

screwed in to secure water-resistance. If your watch case has a protrusion with

screw threads, the crown must be screwed in after setting the watch.

To screw in, push the crown rmly against the threaded protrusion and hold

in while turning the crown clockwise. Continue to screw in the crown until it is

tight. You will need to unscrew the crown (counter-clockwise) before pulling it

out the next time you want to set your watch.

WATER AND SHOCK RESISTANCE

If your watch is water-resistant, meter marking (WR_M) is indicated.

Water-Resistance Depth p.s.i.a. * Water pressure Below Surface

30m/98ft

60

50m/164ft

86

100m/328ft

160

200m/656ft

284

*pounds per square inch absolute

WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY

BUTTONS OR PULL OUT THE CROWN UNDER WATER UNLESS YOUR

WATCH IS INDICATED AS 200 METER WATER-RESISTANT.

1. Watch is water-resistant only as long as crystal, crown and case remain

intact.

2. Watch is not a diver watch and should not be used for diving.

3. Rinse watch with fresh water after exposure to salt water.

4. Shock-resistance will be indicated on the watch face or caseback. Watches

are designed to pass ISO test for shock-resistance. However, care should be

taken to avoid damaging the crystal.

INDIGLO

®

NIGHT-LIGHT

Press button or crown to activate light. Electroluminescent technology used in

the INDIGLO

®

night-light illuminates entire watch face at night and in low light

conditions.

ANALOG/DIGITAL MODELS

4-PUSHER ANALOG/DIGITAL MODEL WITH INDIGLO

®

NIGHT-LIGHT &

NIGHT-MODE

®

FEATURE

“B”

PUSHER

“C”

CROW N

POSITION

PUSHER

“D”

A B

PUSHER

“B”

PUSHER

“A ”

PUSHER

“C”

CROW N

POSITION

PUSHER

“D”

A B

PUSHER

PUSHER

“A”

TO USE INDIGLO

®

NIGHT-LIGHT

1. PRESS pusher “B” to illuminate the entire dial (Both analog and digital).

TO USE NIGHT-MODE

®

FEATURE

1. PRESS and HOLD pusher “B” for 3 seconds until you hear a beep.

2. Pressing any pusher will cause the INDIGLO

®

night-light to illuminate and

stay on for 3 seconds.

3. NIGHT-MODE

®

feature will last for 3 hours.

4. To deactivate NIGHT-MODE

®

feature PRESS and HOLD pusher “B” for 3

seconds.

ANALOG TIME

TO SET ANALOG TIME

1. PULL the crown out to the “B” position.

2. TURN the crown either way to the correct time.

3. PUSH in the crown to the “A” position.

DIGITAL DISPLAY

1. The Digital display changes to each function every time you PRESS pusher

“A”. (As illustrated below):

TIME / CALENDAR

DAILY ALARM

COUNTDOWN TIMER

CHRONOGRAPH

DUAL TIME

START

Press and release MODE

button once.

DUAL TIME CHRONOGRAPH

COUNTDOW N

TIME/

CALENDAR

DAILY

ALARM

TIMER

CALENDAR

HOUR MINUTE SECOND MONTH DATE DAY

Press and release MODE

button once.

Press and release MODE

button once.

TO SET TIME / CALENDAR

1. PRESS pusher “A” to bring up TIME / CALENDAR display.

2. PRESS and HOLD pusher “D”. HOLD will display until second ashes.

3. PRESS pusher “C” to reset to second to “00”.

4. PRESS pusher “A” to let hour ash.

5. PRESS pusher “C” to advance hour.

6. PRESS pusher “A” and “C” as above to adjust tens of minutes, minute, year,

month, date, day and 12/24 hour format.

7. PRESS pusher “D” to complete setting.

8. View or select the TIME or CALENDAR to appear in your digital display.

• PRESS pusher “C” to view the CALENDAR for 2 seconds.

• PRESS and HOLD pusher “C” for 3 seconds until the watch beeps to

change the display to CALENDAR.

• To view or change the display to TIME, repeat the steps above.

NOTE: “A” or “P” will appear when the 12-Hour format is selected.

• Set this time to coordinate with the Analog time or another time zone.

• PRESS and HOLD pusher “C” for 2 seconds in setting mode, to activate fast

advance.

FOLLOWED BY

THE CURRENT

ALARM SETTING

TIME AND TIME

ZONE.

WILL

APPEAR

FOR 3

SECONDS

TO SET DAILY ALARM

1. PRESS pusher “A” to bring up DAILY ALARM display: “ALARM” will appear

for 3 seconds followed by the current alarm setting time and time zone. The

Értékelés

További információ erről a kézikönyvről

Megértjük, hogy jó, ha van egy papíralapú kézikönyv a Timex TW2U90900VQ Waterbury Karóra-hoz. A kézikönyvet bármikor letöltheti weboldalunkról, és saját maga is kinyomtathatja. Ha szeretne egy eredeti kézikönyvet, javasoljuk, hogy lépjen kapcsolatba a következővel: Timex. Esetleg tudnak adni egy eredeti kézikönyvet. Más nyelvű kézikönyvet keres Timex TW2U90900VQ Waterbury Karóra készülékéhez? Válassza ki a kívánt nyelvet a honlapunkon, és keresse meg a modellszámot, hátha elérhető.

Műszaki adatok

Timex Karórák összes kézikönyve
Karórák további kézikönyvei

Gyakran Ismételt Kérdések a következővel kapcsolatban: Timex TW2U90900VQ Waterbury Karóra

Ügyfélszolgálati csapatunk keresi a hasznos termékinformációkat, és válaszol a gyakran ismételt kérdésekre. Amennyiben pontatlanságot talál a gyakran ismételt kérdésekben, a kapcsolatfelvételi űrlapon jelezze nekünk a hibát.

Kapcsolódó termékek

Használati útmutató

Timex TW5M35000JT Ironman Karóra

Használati útmutató

Timex TW2V28800VQ Waterbury Karóra

Használati útmutató

Timex TW2V81900 Allied Karóra

Használati útmutató

Timex TW2V91200ZV Marlin Karóra

Használati útmutató

Timex TW2U97800VQ Waterbury Karóra

Használati útmutató

Timex TW2V21200JT Easy Reader Karóra

Használati útmutató

Timex TWG030000JR Waterbury Karóra

Használati útmutató

Timex TW2V45600VQ Waterbury Karóra

Kapcsolódó kategóriák