Használati útmutató TechniSat Viotenne 55 Műholdvevő antenna

Kézikönyvre van szüksége a TechniSat Viotenne 55 Műholdvevő antenna hez? Az alábbiakban ingyenesen megtekintheti és letöltheti a PDF kézikönyvet angol nyelven. Ez a termék jelenleg 0 gyakran ismételt kérdéseket, 0 megjegyzést tartalmaz, és 0 szavazattal rendelkezik. Ha nem ezt a kézikönyvet szeretné, kérjük, lépjen kapcsolatba velünk.

Hibás a terméke, és a kézikönyv nem kínál megoldást? Látogassa meg a Repair Café szolgáltatást ingyenes javítási szolgáltatásokért.

Használati útmutató

Loading…

To install the outside unit proceed as follows:
Install the retaining bracket on the rotating prism
> Insert screw
6
through the slot in the rotating prism
5
so that the thread points away
from the rotating prism.
> Insert retaining bar
7
into screw
6
as shown in the illustration.
> In each case insert one flat washer
12
onto the two threaded ends of the screw
6
and screw on a nut 14, turning it several times.
Install the rotating prism on the reflector support
> Insert the rotating prism 5 onto reflector support 2 so that the hole in the rotating prism 5
and the top hole in the reflector support 2 are positioned on top of each other.
> Insert a screw 11 through a flat washer 12 and into the hole of the rotating prism 5.
> On the other side, place a flat washer 12 onto the screw 11, put a nut 14 onto the
threads and hand tighten.
> Turn the rotating prism 5 so that its lower corner is pointing at the elevation angle EL,
corresponding to your location.
> Insert a second screw 11 through the flat washer 13 and into the hole in the reflector
support 2 beneath the rotating prism 5.
> On the other side, place a flat washer 13 onto the screw 11, put a nut 14 onto the
threads and gently tighten.
Install the swivelling prism on the reflector support
> Hold the reflector 1 in front of reflector support 2, as shown in the illustration.
> Insert one nut 14 into each of the holes provided on reflector support 2.
> Now connect up the reflector 1 and reflector support 2 to each other using the 4
screws 8.
Fitting the LNB arm onto the reflector support
> Insert LNB arm 3 into the opening on the front of reflector support 2 and push it in
fully, so that it is free of play as it sits in the opening.
If necessary, tap LNB arm 3 gently from the front. If you do so, please ensure that
you do not bend LNB arm 3.
> Insert screw 10 through the hole and screw it into a nut 14.
Fitting the LNB onto the LNB arm
> Separate the two parts of the LNB holder 4 from each other and remove the two
connecting bond bridges.
> Hook the two parts of LNB holder 4 up to each other on the top side.
> Place the LNB into the opening of LNB holder 4 (the LNB connections must be
pointing downwards at the back) and fold them together.
> Insert a nut 14 into the LNB holder and screw these together using screw 9.
> Now insert LNB holder 4 onto LNB arm 3 and ensure that the former hooks into
LNB arm 3.
3
EN
Magyar nyelvű használati útmutató letöltése (PDF, 0.8 MB)
(Gondoljon a környezetre, és csak akkor nyomtassa ki a kézikönyvet, ha feltétlenül szükséges)

Loading…

Értékelés

Ossza meg velünk, mit gondol a TechniSat Viotenne 55 Műholdvevő antenna: értékelje a terméket. Szeretné megosztani a termékkel kapcsolatos tapasztalatát, vagy kérdése van? Írja megjegyzését az oldal alján lévő szövegdobozba.
Elégedett a TechniSat Viotenne 55 Műholdvevő antenna-szal?
Igen Nem
Értékelje elsőként a terméket
0 szavazás

Csatlakozzon a termékről folytatott párbeszédhez

Itt megoszthatja véleményét a TechniSat Viotenne 55 Műholdvevő antenna-ról. Ha kérdése van, először figyelmesen olvassa el a kézikönyvet. Kézikönyv igénylése kapcsolatfelvételi űrlapunk segítségével történhet.

További információ erről a kézikönyvről

Megértjük, hogy jó, ha van egy papíralapú kézikönyv a TechniSat Viotenne 55 Műholdvevő antenna-hoz. A kézikönyvet bármikor letöltheti weboldalunkról, és saját maga is kinyomtathatja. Ha szeretne egy eredeti kézikönyvet, javasoljuk, hogy lépjen kapcsolatba a következővel: TechniSat. Esetleg tudnak adni egy eredeti kézikönyvet. Más nyelvű kézikönyvet keres TechniSat Viotenne 55 Műholdvevő antenna készülékéhez? Válassza ki a kívánt nyelvet a honlapunkon, és keresse meg a modellszámot, hátha elérhető.

Műszaki adatok

Márka TechniSat
Modell Viotenne 55
Kategória Műholdvevő antennák
Fájltípus PDF
Fájl méret 0.8 MB

TechniSat Műholdvevő antennák összes kézikönyve
Műholdvevő antennák további kézikönyvei

Használati útmutató TechniSat Viotenne 55 Műholdvevő antenna

Kapcsolódó termékek

Kapcsolódó kategóriák