Használati útmutató SilverCrest IAN 95909 Kézi aprító

Kézikönyvre van szüksége a SilverCrest IAN 95909 Kézi aprító hez? Az alábbiakban ingyenesen megtekintheti és letöltheti a PDF kézikönyvet angol nyelven. Ehhez a termékhez jelenleg 1 gyakran ismételt kérdés, 0 megjegyzés tartozik, és 0 szavazattal rendelkezik. Ha nem ezt a kézikönyvet szeretné, kérjük, lépjen kapcsolatba velünk.

Hibás a terméke, és a kézikönyv nem kínál megoldást? Látogassa meg a Repair Café szolgáltatást ingyenes javítási szolgáltatásokért.

Használati útmutató

Loading…

7
GB
Shredding
Figure C: In order to work at normal
speed, press the motor block3 down
and then release it again.
Figure D: In order to work at high
speed, additionally press down on the
TURBO1 button.
Work using short pulses (1pulse: press
for approx. 1second).
The number and
length of the pulses will depend on the
quantity and consistency of the food. See
the specifications given in the
"Process-
ing table" section.
Repeatedly check the result. If the food
is not being chopped evenly:
- Pull out the mains plug2, remove the
motor block3 and thoroughly shake
the vessel7.
- If food is sticking to the inside wall of
the vessel, rotate the working cover4
anti-clockwise and remove it. Push the
pieces downwards using a spatula.
- Put all the pieces back together be-
fore you reinsert the mains plug2 into
a wall socket and resume work.
6.2 Cream attachment
Application area
The cream attachment5 has been specially
designed for whipping cream in the multi
chopper. It is placed on top of the blade in-
sert6. There are two options here: one for
smaller quantities (up to 100 ml) and one for
larger quantities (100 to 200 ml).
NOTE: Wherever possible, work with well
cooled whipping cream (refrigerator temper-
ature), so that the whipped cream reaches a
firm consistency.
Whipping cream
1. Place the vessel7 on the vessel cover9.
2. Carefully place the cream attachment5
onto the blade insert6 from above.
- Up to 100 ml: Figure E: Rotate the
cream attachment so that it is in con-
tact with both blades and clicks into
place.
- 100 to 200 ml: Figure F: Rotate the
cream attachment so that it is in con-
tact with one of the blades and clicks
into place. This causes it to sit higher
in the vessel.
3. Place the blade insert6 together with
the cream attachment5 onto the spin-
dle8 in the vessel.
4. Pour the cooled whipping cream (maxi-
mum 200 ml) into the vessel7.
5. Place the working cover4 onto the ves-
sel7 in such a way that the two small
tabs on the working cover fit into the
grooves in the vessel and rotate the
working cover clockwise until it clicks
into place.
6. Place the motor block3 into the upper
edge of the working cover4.
NOTE: The motor block does not fit
onto the working cover entirely straight
on the right-hand side.
7. Press down on the motor block
3
and hold
it pressed down for approx. 30 to 50 sec-
onds. Check the result while doing so.
6.3 Remove food
NOTE:
You can choose to use the vessel cov-
er
9
as the cover or the base
(FigureG)
.
1. Disconnect the mains plug2 from the
wall socket.
2. Remove the motor block3.
3. Rotate the working cover4 anti-clock-
wise and remove it.
4. Carefully remove the blade insert6 (if
necessary together with the cream at-
tachment5) from the vessel7.
5. Remove the food, e.g. using a spatula.
6. Clean the device as soon as possible af-
ter use.
__RP95909_B4.book Seite 7 Donnerstag, 29. August 2013 3:10 15
Magyar nyelvű használati útmutató letöltése (PDF, 1.99 MB)
(Gondoljon a környezetre, és csak akkor nyomtassa ki a kézikönyvet, ha feltétlenül szükséges)

Loading…

Értékelés

Ossza meg velünk, mit gondol a SilverCrest IAN 95909 Kézi aprító: értékelje a terméket. Szeretné megosztani a termékkel kapcsolatos tapasztalatát, vagy kérdése van? Írja megjegyzését az oldal alján lévő szövegdobozba.
Elégedett a SilverCrest IAN 95909 Kézi aprító-szal?
Igen Nem
Értékelje elsőként a terméket
0 szavazás

Csatlakozzon a termékről folytatott párbeszédhez

Itt megoszthatja véleményét a SilverCrest IAN 95909 Kézi aprító-ról. Ha kérdése van, először figyelmesen olvassa el a kézikönyvet. Kézikönyv igénylése kapcsolatfelvételi űrlapunk segítségével történhet.

További információ erről a kézikönyvről

Megértjük, hogy jó, ha van egy papíralapú kézikönyv a SilverCrest IAN 95909 Kézi aprító-hoz. A kézikönyvet bármikor letöltheti weboldalunkról, és saját maga is kinyomtathatja. Ha szeretne egy eredeti kézikönyvet, javasoljuk, hogy lépjen kapcsolatba a következővel: SilverCrest. Esetleg tudnak adni egy eredeti kézikönyvet. Más nyelvű kézikönyvet keres SilverCrest IAN 95909 Kézi aprító készülékéhez? Válassza ki a kívánt nyelvet a honlapunkon, és keresse meg a modellszámot, hátha elérhető.

Műszaki adatok

Márka SilverCrest
Modell IAN 95909
Kategória Kézi aprítók
Fájltípus PDF
Fájl méret 1.99 MB

SilverCrest Kézi aprítók összes kézikönyve
Kézi aprítók további kézikönyvei

Gyakran Ismételt Kérdések a következővel kapcsolatban: SilverCrest IAN 95909 Kézi aprító

Ügyfélszolgálati csapatunk keresi a hasznos termékinformációkat, és válaszol a gyakran ismételt kérdésekre. Amennyiben pontatlanságot talál a gyakran ismételt kérdésekben, a kapcsolatfelvételi űrlapon jelezze nekünk a hibát.

Mi a SilverCrest termékem modellszáma? Ellenőrzött

Bár egyes SilverCrest termékek alternatív modellszámmal rendelkeznek, mindegyiknek van IAN-száma, amellyel a termék azonosítható.

Hasznos volt (3767) Olvass tovább
Használati útmutató SilverCrest IAN 95909 Kézi aprító

Kapcsolódó termékek

Kapcsolódó kategóriák

×
Download