Használati útmutató Lanaform LA120123 Breva Párásító

Használati útmutató

English 4 / 40

midier stops and the indicator lights up red.

You can also stop it at any time by pressing

a fourth time on the touch control button.

Important notes

Use only clean distilled or demineralised

water in order to avoid any malfunction.

Do not pour water into the diuser sprin-

kler tip in order to avoid any malfunction

and risk of re.

Make sure the reservoir cap is tightly closed

after lling in order to avoid any leakage or

electric shocks.

The reservoir must be kept clean. If there

is any dirt on the vapour emission dius-

er sprinkler tip, clean it with a brush or a

damp cloth.



Even though there is a

safety device that stops the

transducer from working, do

not leave the device connected

when you are not using it.

MAINTENANCE

AND STORAGE

Always switch o the humidier before per-

forming any maintenance or storage activities.

If the water contains too much calcium and

magnesium, it may deposit a “white pow-

der” in the device. If this foam is deposited

on the transducer

[



,



]

, this will prevent

the Breva humidier from working properly.

Maintenance

We recommend:

1 Using clean distilled or demineralised

water each time the device is used.

2 Cleaning the reservoir every

2 days and cleaning the

transducer every week.

3 Cleaning the device (see expla-

nations below) and making sure

that all of its parts are completely

dry when it is not in use.

To clean the transducer [



,



]:

1 Place 2 to 5 drops of vinegar on its

surface and leave for 2 to 5 minutes.

2 Brush the foam o the surface

using a soft brush. Do not use a

hard tool to scrape the surface.

3 Rinse the reservoir of the

base in clean water.

Do not use soap, solvent or spray cleaner

to clean the transducer.

To clean the basin [



,



]:

1 Clean the basin with water using

a soft cloth, and use vinegar if

there are any foam or limes-

cale deposits on the inside.

2 Rinse the basin in clean water.

To clean the diuser nozzle of the device

[



,



]

:

1 Clean it with a brush or damp cloth.

2 Rinse the vapour emission

sprinkler tip in clean water.

To clean the anti-scaling lter [



,



]:

1 The ceramic beads must be

cleaned after using approxi-

mately 1000ltr of water.

2 Remove the reservoir’s lter.

3 Put some white vinegar into

a glass and soak the lter for

approximately 10 minutes.

4 Remove the glass lter and

shake it several times.

5 Rinse the lter in clean water.

Storage

If you do not intend using the device for

a lengthy period, remove the reservoir’s

lter and allow it to dry completely, then

wrap in a protective package and store it

with the clean, dry humidier in a cool, dry

place out of direct light.



TROUBLESHOOTING

In the event of a malfunction under nor-

mal conditions of use, please refer to the

following list:



No operating indicator

light, no vapour



No voltage, no current.



Check that the device is connected

and that there is no mains fault.



Red indicator light, no vapour.



No water in the reservoir.



Pour clean distilled or demineralised

water into the reservoir.



The vapour has an

unpleasant odour.



The device is new.



Drain the water from the reservoir

and leave the reservoir to air

out for at least  hours.



The water is contaminated or has

been in the reservoir too long.



Unplug the device, drain the water

from the reservoir, rinse and clean

the reservoir, and ll the reservoir

with demineralised or distilled water.



Low vapour intensity.



The vapour emission sprinkler

tip is obstructed.



Unplug the device and clean the

vapour emission sprinkler tip.



The water is dirty or has been

standing in the reservoir for too long.



Clean the reservoir and ll it

with clean, fresh water.



Unusual noise emitted

during operation.



The device is on an unstable

or non-at surface.



Unplug the device and place

it on a at, stable surface.



Vapour leaves the device around

the diuser sprinkler tip.



There are gaps between the

sprinkler tip and reservoir.



Clean the diuser sprinkler tip

and replace it on the reservoir.



The following eects are not

regarded as malfunctions:

1 If your water is particularly hard

(contains a lot of minerals), the

humidier may produce a sort of

white dust. This is not a malfunc-

tion. The solution is to clean the

anti-limescale lter more frequently

or to use water that is not as hard.

2 If you stand close to the humidi-

er, you will hear the gurgling of

the water and this is normal.

3 The device runs very calmly but not

entirely quietly. A sound level of less

than 35dB is regarded as normal.

ADVICE ON WASTE

DISPOSAL

The packaging consists entirely of envi-

ronmentally-friendly materials that can be

taken to your local waste sorting centre to

be used as secondary materials. Cardboard

can be placed in a paper collection contain-

er. Packing lm must be taken to your local

sorting and recycling centre.

When you are no longer using the device,

dispose of it in an environmentally respon-

sible manner and in compliance with the

statutory requirements.

LIMITED WARRANTY

LANAFORM guarantees that this product

will be free from any material and work-

manship defects for a period of two years

from the date it was purchased, other than

as specied below.

The LANAFORM warranty does not cover

damage caused by normal wear and tear

on this product. In addition, the warranty

on this LANAFORM product does not cover

damage caused as a result of any abusive,

inappropriate or incorrect use, accident,

attachment of any unauthorised accesso-

ry, modication of the product or any oth-

er situation of whatever kind, beyond the

control of LANAFORM.

LANAFORM shall not be held liable for

any type of incidental, consequential or

special damage.

EN FR NL DE ES IT PL CS SK HU SL HR RU BG SV AR

E-IM-Breva-001-2018.indd 4 5/09/2018 09:16:40

Értékelés

További információ erről a kézikönyvről

Megértjük, hogy jó, ha van egy papíralapú kézikönyv a Lanaform LA120123 Breva Párásító-hoz. A kézikönyvet bármikor letöltheti weboldalunkról, és saját maga is kinyomtathatja. Ha szeretne egy eredeti kézikönyvet, javasoljuk, hogy lépjen kapcsolatba a következővel: Lanaform. Esetleg tudnak adni egy eredeti kézikönyvet. Más nyelvű kézikönyvet keres Lanaform LA120123 Breva Párásító készülékéhez? Válassza ki a kívánt nyelvet a honlapunkon, és keresse meg a modellszámot, hátha elérhető.

Műszaki adatok

Lanaform Párásítók összes kézikönyve
Párásítók további kézikönyvei

Gyakran Ismételt Kérdések a következővel kapcsolatban: Lanaform LA120123 Breva Párásító

Ügyfélszolgálati csapatunk keresi a hasznos termékinformációkat, és válaszol a gyakran ismételt kérdésekre. Amennyiben pontatlanságot talál a gyakran ismételt kérdésekben, a kapcsolatfelvételi űrlapon jelezze nekünk a hibát.

Kapcsolódó termékek

Használati útmutató

Lanaform Family Care Párásító

Használati útmutató

Lanaform Mixy Párásító

Használati útmutató

Lanaform Trainy Párásító

Használati útmutató

Lanaform Vapo 360 Párásító

Használati útmutató

Lanaform Notus Párásító

Használati útmutató

Lanaform Vapolux Párásító

Használati útmutató

Lanaform Lily Párásító

Használati útmutató

Lanaform Hello Kitty Párásító

Kapcsolódó kategóriák