Használati útmutató Defort DID-1055Nx2S Ütvefúró

Használati útmutató

7

GB

Hammer drill

INTENDED USE

This tool is intended for hammer drilling in brick, con-

crete and stone as well as for drilling in wood, metal,

ceramic and plastic. Tools with electronic speed control

and left/right rotation are also suitable for screwdriving

and thread cutting

TECHNICAL SPECIFICATIONS 1

PRODUCT ELEMENTS 2

1 On/Off switch with speed control

2 Switch locking button

3 Wheel for maximum speed control

4 Switch for changing direction of rotation

5 Switch for selecting drilling function

6 Auxiliary handle

7 Switch for selecting mechanical speed

SAFETY

WARNING! Read all instructions. Failure to follow all

instructions listed below may result in electric shock,

fi re and/or serious injury.

● Wear ear protectors with hammer drills (exposure to

noise can cause hearing loss)

● Use auxiliary handles supplied with the tool (loss of

control can cause personal injury)

● Avoid damage that can be caused by screws, nails

and other elements in your workpiece; remove them

before you start working

● Always keep the cord away from moving parts of the

tool

● When you put away the tool, switch off the motor

and ensure that all moving parts have come to a

complete standstill

● Use completely unrolled and safe extension cords

with a capacity of 16 Amps (UK 13 Amps)

● In case of electrical or mechanical malfunction,

immediately switch off the tool and disconnect the

plug

● SBM Group can assure fl awless functioning of the

tool only when original accessories are used

● Use only accessories with an allowable speed

matching at least the highest no-load speed of the

tool

● This tool should not be used by people under the

age of 16 years

● Be careful not to drill or drive into areas where

electrical wires may be contacted

● If the cord is damaged or cut through while working,

do not touch the cord, but immediately disconnect

the plug

● Never use tool when cord is damaged; have it

replaced by a qualifi ed person

● Always check that the supply voltage is the same

as the voltage indicated on the nameplate of the

tool (tools with a rating of 230V or 240V can also be

connected to a 220V supply)

● If the drill bit becomes unexpectedly jammed (causing

a sudden, dangerous reaction), immediately switch

off the tool

● Be aware of the forces that occur as a result of

jamming (especially when drilling metals); always

hold the tool fi rmly with both hands and take a

secure stance

● Always disconnect plug from power source before

making any adjustment or changing any accessory

● Holding the tool

- keep the ventilation slots uncovered

- do not apply too much pressure on the tool; let the

tool do the work for you

Your machine is double insulated in accord-

ance with EN 50144; therefore no earthwire is

required.

MAINTENANCE

Make sure that the machine is not live when

carrying out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots

free from dust and dirt.If the dirt does not come off use

a soft cloth moistened with soapy water. Never use

solvents such as petrol, alcohol, ammonia water, etc.

These solvents may damage the plastic parts.

The machine requires no additional lubrication.

Should a fault occur, e.g. after wear of a part, please

contact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most of

the packaging materials can be recycled. Take these

materials to the appropriate recycling locations. Take

your unwanted machines to your local SBM Group

dealer. Here they will be disposed of in an environmen-

tally safe way.

English

Értékelés

További információ erről a kézikönyvről

Megértjük, hogy jó, ha van egy papíralapú kézikönyv a Defort DID-1055Nx2S Ütvefúró-hoz. A kézikönyvet bármikor letöltheti weboldalunkról, és saját maga is kinyomtathatja. Ha szeretne egy eredeti kézikönyvet, javasoljuk, hogy lépjen kapcsolatba a következővel: Defort. Esetleg tudnak adni egy eredeti kézikönyvet. Más nyelvű kézikönyvet keres Defort DID-1055Nx2S Ütvefúró készülékéhez? Válassza ki a kívánt nyelvet a honlapunkon, és keresse meg a modellszámot, hátha elérhető.

Műszaki adatok

Defort Ütvefúrók összes kézikönyve
Ütvefúrók további kézikönyvei

Gyakran Ismételt Kérdések a következővel kapcsolatban: Defort DID-1055Nx2S Ütvefúró

Ügyfélszolgálati csapatunk keresi a hasznos termékinformációkat, és válaszol a gyakran ismételt kérdésekre. Amennyiben pontatlanságot talál a gyakran ismételt kérdésekben, a kapcsolatfelvételi űrlapon jelezze nekünk a hibát.

Kapcsolódó termékek

Használati útmutató

Defort DID-955N Ütvefúró

Használati útmutató

Defort DID-755N-Q Ütvefúró

Használati útmutató

Defort DID-655N-QK Ütvefúró

Használati útmutató

Defort DID-655N-QB Ütvefúró

Használati útmutató

Hyundai HYD-3206 Ütvefúró

Használati útmutató

Trotec PIWS 10-20V Ütvefúró

Használati útmutató

FF Group ID 550 Plus Ütvefúró

Használati útmutató

Ryobi EID-500RS Ütvefúró

Kapcsolódó kategóriák