Használati útmutató Bionaire BOF1500 Hősugárzó

Használati útmutató

2 3

PLEASE READ AND SAVE THESE

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic safety

precautions should always be taken including the

following:

1. Before connecting the heater, check that

the voltage indicated on the rating plate

corresponds to the main voltage in your

home/ofce.

2. WARNING: In order to avoid overheating,

do not cover the heater ( ).

3. DO NOT position the heater directly under a

power socket.

4. Do not use this heater in the immediate

surroundings of a bath, a shower or a

swimming pool.

5. If the supply cord or plug is damaged, it must

be replaced by the manufacturer or its service

agent or similarly qualied person in order to

avoid hazard. The heater contains no user

serviceable parts. Should the product suffer

damage or breakdown, it must be returned to

the manufacturer or their service agent.

6. Under the environment with electrical fast

transient, the product may malfunction and

require user to reset the product.

7. Do not use this heater with a programmer,

timer or any other device that switches the

heater on automatically, since a re risk

exists if the heater is covered or positioned

incorrectly.

8. Only touch the heater with dry hands.

9. DO NOT use this heater outdoors.

10. DO NOT position where it can be touched by

children, especially the very young.

11. Allow a safe area around the heater away

from furniture or other objects; at least 50

cm from the top and sides and 200 cm at the

front.

12. Do not use this heater when it is lying on its

side.

13. DO NOT use the heater in rooms with

explosive gas (e.g. petrol) or while using

inammable glue or solvent (e.g. when gluing

or varnishing parquet oors, PVC etc).

14. DO NOT insert any objects into the heater.

15. Keep the mains cord at a safe distance from

the main body of the heater. Turn off and

unplug heater when not in use and before

cleaning.

16. If overheating should occur, the built-in

overheating safety device will switch off the

heater.

17. Do not place the cord under a rug.

18. The heater cannot be used adjacent to

curtains or combustible material. Curtains or

combustible material may be burned if the

heater was installed incorrectly.

19. This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities,

or lack of experience and knowledge,

unless they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

Children should be supervised to ensure that

they do not play with the appliance.

20. WARNING: Risk of Fire. Discontinue

use if the outlet or plug become hot to the

touch. Overheating may indicate a worn

or damaged outlet. Consult a qualied

electrician for outlet replacement.

21. CAUTION: In order to avoid a hazard due

to inadvertent resetting of the thermal cutout,

this appliance must not be supplied through

an external switching device, such as a timer,

or connected to a circuit that is regularly

switched on and off by the utility.

22. FOR FLOOR USE ONLY.

DESCRIPTIONS (See Fig.1 & 2)

A. Mode Control

B. Thermostat Control

C. Power Light

D. Cord Wrap

E. Casters (4)

F. Foot Plates (2)

G. Wing head Screws (4)

ASSEMBLY INSTRUCTIONS

Unpack your heater from the box, being careful

to remove all parts from plastic bags and

remaining packaging. Please save the carton for

off-season storage.

This heater is packed with 4 casters that are pre-

assembled on 2 separate foot plates in the box.

Follow the below instructions for Foot Plates

assembly:

Foot Plates Assembly

Step 1: Turn the heater upside down, locate

the 4 wing head screws packed inside

the box.

Step 2: Install the 2 foot plates onto the bottom

at both ends of the heater housing.

Line up holes of the foot plates with

holes on bottom of heater housing

at both ends, and secure with the 4

provided screws. (Refer to Fig.1)

Step 3: Turn the heater right side up on a

at level surface prior to beginning

operation. (Refer to Fig. 1)

OPERATING INSTRUCTIONS

1. Place heater on a rm, level surface.

2. Make sure the Mode Control is at the

OFF(0) position. Plug heater into a standard

outlet. Once plugged in, the Power Light will

illuminate.

NOTE: Avoid overloading your circuit by not

using other high wattage appliances in the

same outlet. Wattage as follows:

1500W for BOF1500

2000W for BOF2000

3. To start operations, turn the Thermostat

Control clockwise to the highest setting.

4. Turn the Mode Control to the desired level of

heat (1-2-3).

5. To turn off the heater at any time, turn the

Mode Control to OFF (0) position.

- Thermostat Control

1. To start operations, turn the Thermostat

Control clockwise to the highest setting.

2. When the desired temperature or comfort

level is reached, turn the Thermostat Control

counter-clockwise to a lower position or until

the heater stop operating.

3. The heater will now automatically maintain

the preset temperature level by turning the

heater ON and OFF.

- Frost Guard Setting

Your heater is equipped with Frost Guard setting.

The heater will turn on automatically when the

room temperature drops below 4°C. To activate

Frost Guard, turn the Thermostat Control all the

way counter-clockwise to the lowest position. If

the room temperature drops below 4˚C, the

heater will automatically start working to maintain

its ambient temperature.

NOTE: It is normal for the heater to cycle on and

off to maintain the preset temperature. Raise the

thermostat setting to prevent the heater from

cycling.

CORD STORAGE

For easy storage, wrap cord around the Cord

Wrap position at the front of the heater.

CLEANING AND MAINTENANCE

Always unplug the heater before cleaning and

allow the heater to cool down.

1. Clean the unit with a soft cloth moistened

with a mild soap and water solution.

2. NEVER use abrasive or ammable solvents

to clean the unit.

3. After cleaning, be sure to completely dry the

unit with a cloth or towel.

4. Store heater in a cool, dry location.

5. It is recommended that you store the unit in

its original carton.

AUTO SAFETY SHUT-OFF

This heater is equipped with a technologically-

advanced safety system that requires the user to

reset the heater if there is a potential overheat

situation. When a potential overheat temperature

is reached, the system will automatically shut the

heater off. It can only resume operation when the

user resets the unit.

If the heater shuts down and the Power

Light is ashing:

1. Stand the heater upright, and turn the Mode

Control to Off (0).

2. Unplug the heater and allow 30 minutes for

the heater to cool down.

3. After 30 minutes plug the heater in and

operate normally.

4. If the heater does not work normally, repeat

steps 1, 2 and 3 again.

Tip Over Shut-Off:

When the unit is accidentally knocked over or

tilts on one side at more than a 45° angle, it will

instantly shut off. The unit may also shut off if it

is moved or bumped. To reset, simply place the

heater in an upright position, and it will operate

normally.

TROUBLE SHOOTING

General Information:

Environmental Factors - There are a number of

factors that will affect your desired comfort level.

These factors can include insulation, open or

drafty doors and windows, and outside

temperature. Please check and take action if any

of these potential problems are affecting your

heaters ability to adequately warm your room.

Supplemental Heat - Portable electric heaters

are intended for supplemental heating of the

room you are in and turn down the central heat

thermostat. They are not intended to replace

central heating systems.

DO NOT attempt to repair or adjust any

electrical or mechanical functions on this

heater. Doing so will void warranty. The

inside of the heater contains no user

serviceable parts. All servicing should be

performed by qualified personnel only.

If your heater fails to operate:

- UNPLUG the heater.

- Make sure the electrical outlet or circuit braker

is working.

- The thermostat temperature may be set too

low. Turn the Thermostat Control clockwise until

the heater restarts.

Fig.2

Fig.1

BOF1500 & BOF2000

BOF1500 & BOF2000

G

E

D

C

C

B

B

A

F

A

F

E

ENGLISH

BOF1500-050_BOF2000-050_12MLM1.indd 4-6 7/9/12 8:53 AM

Értékelés

További információ erről a kézikönyvről

Megértjük, hogy jó, ha van egy papíralapú kézikönyv a Bionaire BOF1500 Hősugárzó-hoz. A kézikönyvet bármikor letöltheti weboldalunkról, és saját maga is kinyomtathatja. Ha szeretne egy eredeti kézikönyvet, javasoljuk, hogy lépjen kapcsolatba a következővel: Bionaire. Esetleg tudnak adni egy eredeti kézikönyvet. Más nyelvű kézikönyvet keres Bionaire BOF1500 Hősugárzó készülékéhez? Válassza ki a kívánt nyelvet a honlapunkon, és keresse meg a modellszámot, hátha elérhető.

Műszaki adatok

Bionaire Hősugárzók összes kézikönyve
Hősugárzók további kézikönyvei

Gyakran Ismételt Kérdések a következővel kapcsolatban: Bionaire BOF1500 Hősugárzó

Ügyfélszolgálati csapatunk keresi a hasznos termékinformációkat, és válaszol a gyakran ismételt kérdésekre. Amennyiben pontatlanságot talál a gyakran ismételt kérdésekben, a kapcsolatfelvételi űrlapon jelezze nekünk a hibát.

Kapcsolódó termékek

Használati útmutató

Bionaire BOH1501W Hősugárzó

Használati útmutató

Bionaire BOH2503D Hősugárzó

Használati útmutató

Bionaire BCH160 Hősugárzó

Használati útmutató

Bionaire BOH2001 Hősugárzó

Használati útmutató

Bionaire BFH910 Hősugárzó

Használati útmutató

Bionaire BFH3520 Hősugárzó

Használati útmutató

Bionaire BFH400 Hősugárzó

Használati útmutató

Bionaire BFH430 Hősugárzó

Kapcsolódó kategóriák