Használati útmutató Bionaire BFH6616 Hősugárzó

Használati útmutató

DESCRIPTION (SEE FIGURE 2)

A. Temperature Settings (5)

B. Heat Settings 1/2 Power Indicators

C. Mode ( ) Button

D. Power Light Indicator

PRE-OPERATING INSTRUCTIONS

Carefully unpack your heater from the box (it is

recommended to save the box for summer

storage).

OPERATING INSTRUCTIONS

Your heater is equipped with a technologically

advanced electronic thermostat. You can set the

heater to run continuously in manual mode or

set the thermostat to your desired temperature

setting. The thermostat will automatically turn

the heater ON or OFF depending on the preset

comfort level. The comfort level ranges between

16˚C and 24˚C.

Manual Mode Instructions:

1. Plug the heater into the wall socket.

2. To start the unit, press the Mode ( )

button once for the 2 manual setting. (See

Figure 2)

3. Press the Mode ( ) button again for

the 1 manual setting. (See Figure 2)

4. To stop the unit, press and hold the button

for two seconds or keep pressing the button

until all the temperature indicators are OFF.

NOTE: The Power Light Indicator will remain lit

during operation. In Manual Mode, only the 1 or

2 power light Indicator will be lit.

THERMOSTAT INSTRUCTIONS

To take advantage of the thermostat, continue to

press the Mode ( ) button until the

desired temperature is set in either the 2 or 1

setting. When the ambient temperature rises

above the set temperature, the heater will stop.

When the ambient temperature drops below the

set temperature, the heater will turn on

automatically.

NOTE: When the thermostat is set, either the 2

or 1 power light indicator, and the set

temperature light will remain lit during operation.

(See Figure 2)

NOTE: It is normal for the heater to cycle ON

and OFF as it maintains the preset temperature.

To prevent the unit from cycling, you need to

raise the thermostat setting. When the preset

temperature is made, the fan will run for 30

seconds without heat. This cool down process

ensures an accurate and consistent temperature

reading.

NOTE: The thermostat has memory. The

thermostat will remember the previous

temperature setting after the unit has been

turned off. However, if the unit is unplugged, the

thermostat will be reset and will no longer

remember the previous setting.

PIVOTING HEATER

For improved heat circulation, your heater

comes with a manual pivot. The top half of your

heater pivots to the left and right for better heat

distribution. The bottom half of the heater is

stationary and will not turn. (See Figure 1)

Do not swivel the unit beyond the point of

resistance.

AUTO SAFETY SHUT-OFF

This heater is equipped with a technologically

advanced safety system that requires the user to

reset the heater if there is a potential overheat

situation. When a potential overheat temperature

is reached, (e.g. if the heater was accidentally

covered) the system will automatically switch the

heater off. Operation can only be resumed if the

user resets the heater as detailed below.

To Reset the Heater

1. Unplug the heater and allow 30 minutes for

the heater to cool down.

2. After 30 minutes plug the heater in and

operate normally.

3. If the heater does not work normally,

repeat steps 1 and 2 again.

TIP-OVER SHUT-OFF

When the unit is accidentally knocked over, it will

instantly shut off. To reset, simply place the

heater in an upright position and press the

Mode ( ) button it will operate normally.

CLEANING/MAINTENANCE

During Season Care:

1. Always unplug the heater before cleaning.

2. Clean the unit with a soft cloth moistened

with a mild soap solution.

3. NEVER use abrasive or flammable solvents

to clean the unit.

4. After cleaning, be sure to completely dry the

unit with a cloth or towel.

STORAGE TIPS

If the heater is not required for long periods, for

example during the summer, it should be stored

in a dry place and preferably covered to prevent

the accumulation of dust and dirt.

U.K. and IRELAND

TROUBLESHOOTING

If your heater fails to operate:

• First check the fuse in the plug (UK only) or

fuse / circuit breaker at the distribution board

is operating.

• Check for obstructions which could prevent

airflow and cause overheating. If you find an

obstruction turn the heater OFF, carefully

remove the obstruction and follow the Reset

instructions above.

• The Thermostat might be set too low. Raise

the Thermostat until the heater restarts.

PLEASE READ AND SAVE THESE

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic safety

precautions should always be taken including

the following:

1. Before connecting the heater, check that the

voltage indicated on the rating plate

corresponds to the main voltage in your

home/office.

2. WARNING: In order to avoid overheating, do

not cover the heater ( ).

3. DO NOT position the heater directly under a

power socket.

4. DO NOT use this heater in the immediate

surroundings of a bath, a shower or a

swimming pool.

5. If the supply cord is damaged, it must be

replaced by the manufacturer or its service

agent or similarly qualified person in order to

avoid hazard. The heater contains no user

serviceable parts. Should the product suffer

damage or breakdown, it must be returned to

the manufacturer or their service agent.

6. Under the environment with electrical fast

transient, the product may malfunction and

require user to reset the product.

7. DO NOT use this heater with a

programmable, timer, separate remote-

control system or any other device that

switches the heater on automatically, since a

fire risk exists if the heater is covered or

positioned incorrectly.

8. Only touch the heater with dry hands.

9. DO NOT position where it can be touched by

children, especially the very young.

10. DO NOT use this heater outdoors.

11. Allow a safe area around the heater away from

furniture or other objects; at least 50 cm from

the top and sides and 200 cm at the front.

12. DO NOT use this heater when it is lying on its side.

13. DO NOT use the heater in rooms with

explosive gas (e.g. petrol) or while using

inflammable glue or solvent (e.g. when

gluing or varnishing parquet floors, PVC etc.).

14. DO NOT insert any objects into the heater.

15. Keep the mains cord at a safe distance from

the main body of the heater.

16. If overheating should occur, the built-in

overheating safety device will switch off the

heater.

17. DO NOT place the cord under a rug.

18. The heater is to be installed so that switches

and other controls cannot be touched by a

person in the bath.

19. Avoid the use of an extension cord because

it may cause the heater to overheat.

20. CAUTION: In order to avoid a hazard due

to inadvertent resetting of the thermal cut-

out, this appliance must not be supplied

through an external switching device, such

as a timer, or connected to a circuit that is

regularly switched on and off by the utility.

21. This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

Children should be supervised to ensure that

they do not play with the appliance.

FOR U.K. AND IRELAND ONLY

If the plug is not suitable for the socket outlets in

your home, it can be removed and replaced by

a plug of the correct type. Please refer to

"Installation of a plug" below.

Installation of a plug applicable to U.K.

and Ireland only

NOTE: If the terminals in the plug are not marked

or if you are unsure or in doubt about the

installation of the plug please contact a qualified

electrician.

If a 13A 3-pin plug is fitted, it must be an ASTA

approved plug, conforming to BS1363 standard.

Replacement 13A fuses must be BSI or ASTA

BS1362 approved.

This product is fitted with a 13A plug complying to

BS1363. If this plug is unsuitable or needs to be

replaced, please note the following: The wires in

the mains lead are coloured as such:

BFH6616

18

20

22

24 C

16

C

B

A

B

D

Figure 1

Figure 2

13 A Fuse

1 2

BFH6616-I_08MLM1-NEW.qxd:Euro BIONAIRE Heater Temp.qxd 4/29/08 7:38 PM Page 4

Értékelés

További információ erről a kézikönyvről

Megértjük, hogy jó, ha van egy papíralapú kézikönyv a Bionaire BFH6616 Hősugárzó-hoz. A kézikönyvet bármikor letöltheti weboldalunkról, és saját maga is kinyomtathatja. Ha szeretne egy eredeti kézikönyvet, javasoljuk, hogy lépjen kapcsolatba a következővel: Bionaire. Esetleg tudnak adni egy eredeti kézikönyvet. Más nyelvű kézikönyvet keres Bionaire BFH6616 Hősugárzó készülékéhez? Válassza ki a kívánt nyelvet a honlapunkon, és keresse meg a modellszámot, hátha elérhető.

Műszaki adatok

Bionaire Hősugárzók összes kézikönyve
Hősugárzók további kézikönyvei

Gyakran Ismételt Kérdések a következővel kapcsolatban: Bionaire BFH6616 Hősugárzó

Ügyfélszolgálati csapatunk keresi a hasznos termékinformációkat, és válaszol a gyakran ismételt kérdésekre. Amennyiben pontatlanságot talál a gyakran ismételt kérdésekben, a kapcsolatfelvételi űrlapon jelezze nekünk a hibát.

Kapcsolódó termékek

Használati útmutató

Bionaire BOH2003B Hősugárzó

Használati útmutató

Bionaire BFH420 Hősugárzó

Használati útmutató

Bionaire BPH1414 Hősugárzó

Használati útmutató

Bionaire BOF1500 Hősugárzó

Használati útmutató

Bionaire BOH2001W Hősugárzó

Használati útmutató

Bionaire BFH430 Hősugárzó

Használati útmutató

Bionaire BCH920 Hősugárzó

Használati útmutató

Bionaire BOH2001 Hősugárzó

Kapcsolódó kategóriák