Használati útmutató Bionaire BCH160 Hősugárzó

Használati útmutató

2 3

RETAIN THE FOLLOWING FOR FUTURE

REFERENCE.

DESCRIPTIONS (See Fig.1 & 2)

A. Front Housing

B. Back Housing

C. Grill

D. Power Light Ring

E. Mode control

F. Thermostat control

PLEASE READ AND SAVE THESE

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic safety

precautions should always be taken including the

following:

1. Before connecting the heater, check that

the voltage indicated on the rating plate

corresponds to the main voltage in your

home/offi ce.

2. WARNING: In order to avoid overheating,

do not cover the heater (

).

3. DO NOT position the heater directly under a

power socket.

4. Do not use this heater in the immediate

surroundings of a bath, a shower or a

swimming pool.

5. If the supply cord or plug is damaged, it must

be replaced by the manufacturer or its service

agent or similarly qualifi ed person in order to

avoid hazard. The heater contains no user

serviceable parts. Should the product suffer

damage or breakdown, it must be returned to

the manufacturer or their service agent.

6. Under the environment with electrical fast

transient, the product may malfunction and

require user to reset the product.

7. Do not use this heater with a programmer,

timer or any other device that switches the

heater on automatically, since a fi re risk

exists if the heater is covered or positioned

incorrectly.

8. Only touch the heater with dry hands.

9. DO NOT use this heater outdoors.

10. DO NOT position where it can be touched by

children, especially the very young.

11. Allow a safe area around the heater away

from furniture or other objects; at least 50

cm from the top and sides and 200 cm at the

front.

12. Do not use this heater when it is lying on its

side.

13. DO NOT use the heater in rooms with

explosive gas (e.g. petrol) or while using

infl ammable glue or solvent (e.g. when gluing

or varnishing parquet fl oors, PVC etc).

14. DO NOT insert any objects into the heater.

15. Keep the mains cord at a safe distance from

the main body of the heater.

16. If overheating should occur, the built-in

overheating safety device will switch off the

heater.

17. Do not place the cord under a rug.

18. The heater cannot be used adjacent to

curtains or combustible material. Curtains or

combustible material may be burned if the

heater was installed incorrectly.

19. This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities,

or lack of experience and knowledge,

unless they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

Children should be supervised to ensure that

they do not play with the appliance.

20. WARNING: Risk of Fire. Discontinue

use if the outlet or plug become hot to the

touch. Overheating may indicate a worn

or damaged outlet. Consult a qualifi ed

electrician for outlet replacement.

21. CAUTION: In order to avoid a hazard due

to inadvertent resetting of the thermal cutout,

this appliance must not be supplied through

an external switching device, such as a timer,

or connected to a circuit that is regularly

switched on and off by the utility.

OPERATING INSTRUCTIONS

1. Make sure the unit is in the OFF (O) position

before plugging the heater into the wall

socket/outlet.

2. Place heater on a fi rm level surface. Once

plugged in, the power light ring (D) will

remain lit during operation.

3. Avoid overloading your circuit by not using

other high wattage appliances in the same

outlet. At 1800 Watts, this unit draws 8.2

Amps.

Mode Control

Turn the Mode Control (E) to the desired setting:

O - Off Mode

If you want to shut off the heater at any time

of operation, turn the mode button to OFF (O)

position. The power light ring will remain lit until

the heater is turned to OFF (O).

- Fan only Setting

The heater will run at Fan-only operation without

any heat output.

ENGLISH

1- LOW Heat

The heater will run continuously at 1200W.

2- HIGH Heat

The heater will run continuously at 1800W.

NOTE: To start the heater operation, make sure

the Thermostat Control (F) is turned to the full

clockwise position.

- Thermostat Control

1. Before setting the thermostat, allow heater

to operate and warm up the room. As noted

above, you need to turn the Thermostat

Control (F) to the full clockwise position to

start the heater.

2. When the desired temperature/ comfort level

is reached, lower the thermostat setting until

the heater stops operating. This is done by

moving the Thermostat control (F) anti-

clockwise toward the Frost Guard setting

(

). If moved to the Frost Guard ( ) the

thermostat is set to 5°C, the heater will turn

on automatically if the temperature goes

below 5°C so as to avoid a frost situation.

3. The control will now automatically maintain

the pre-set temperature level by turning the

heater ON and OFF.

NOTE: It is normal for the heater to cycle ON

and OFF as it maintains the preset temperature.

To prevent the unit from cycling , you need to

change the thermostat setting.

CAUTION: The GRILL (C) IS HOT WHEN

UNIT IS IN OPERATION.

AUTO SAFETY SHUT OFF

This heater is equipped with a technologically-

advanced safety system that requires the user to

reset the heater if there is a potential overheat

situation. When a potential overheat temperature

is reached, the system will automatically shut the

heater off. It can only resume operation when the

user rests the unit. If the heater shuts off, please

follow the specific reset instructions below:

1. Turn Mode Control to OFF (O) position and

the Thermostat Control to the fully anti-

clockwise position.

2. Unplug unit from socket and wait 30 minutes

for the unit to cool down.

3. After the 30 minutes, plug the unit in and

operate normally.

CLEANING AND MAINTENANCE

• Turn off the unit.

• Remove the plug from the wall socket.

• Wait for the heater to cool down suffi ciently.

• You may clean the outside of the heater with

a damp cloth. DO NOT allow water to come

into the appliance. DO NOT use soap or

chemicals, which may damage the housing.

Allow suffi cient time to dry before plugging

the unit back in the socket.

• Clean the air inlet and outlet openings

regularly (with normal use at least twice a

year) with a vacuum cleaner.

Troubleshooting for your Heater

Trouble Probable Cause Solution

• Heater

Does Not

Turn On.

☛

Manual user reset is activated.

☛

Not plugged in properly.

☛

Electrical outlet does not hold

plug in securely.

☛

Thermostat set too low.

☛

Obstruction causing the heater

not to work.

✔

Follow reset instructions listed in this

manual.

✔

Ensure plug is properly inserted.

Make sure electrical outlet and circuit

breaker are working.

✔

Have outlet replaced by a licensed

electrician.

✔

Turn Thermostat Control clockwise

until the heater restarts.

✔ Unplug the heater and remove all

obstructions. Position your heater

at least 50cm away from obejcts for

the top, back and sides and at least

200cm distance away from objects for

the front grill.

• Not Enough

Heat.

☛

Heater is in Low Heat or 1

setting.

☛

Thermostat set too low.

✔

Change setting to 2 (High Heat).

✔

Turn Thermostat Control clockwise

until the heater restarts.

Fig.2

E

F

BCH160

Fig.1

E

B

F

BCH160

A

D

C

BCH160-I_10MLM1.indd 4-6BCH160-I_10MLM1.indd 4-6 4/19/10 10:18:36 AM4/19/10 10:18:36 AM

Értékelés

További információ erről a kézikönyvről

Megértjük, hogy jó, ha van egy papíralapú kézikönyv a Bionaire BCH160 Hősugárzó-hoz. A kézikönyvet bármikor letöltheti weboldalunkról, és saját maga is kinyomtathatja. Ha szeretne egy eredeti kézikönyvet, javasoljuk, hogy lépjen kapcsolatba a következővel: Bionaire. Esetleg tudnak adni egy eredeti kézikönyvet. Más nyelvű kézikönyvet keres Bionaire BCH160 Hősugárzó készülékéhez? Válassza ki a kívánt nyelvet a honlapunkon, és keresse meg a modellszámot, hátha elérhető.

Műszaki adatok

Bionaire Hősugárzók összes kézikönyve
Hősugárzók további kézikönyvei

Gyakran Ismételt Kérdések a következővel kapcsolatban: Bionaire BCH160 Hősugárzó

Ügyfélszolgálati csapatunk keresi a hasznos termékinformációkat, és válaszol a gyakran ismételt kérdésekre. Amennyiben pontatlanságot talál a gyakran ismételt kérdésekben, a kapcsolatfelvételi űrlapon jelezze nekünk a hibát.

Kapcsolódó termékek

Használati útmutató

Bionaire BFH410 Hősugárzó

Használati útmutató

Bionaire BFH6616 Hősugárzó

Használati útmutató

Bionaire BOF1500 Hősugárzó

Használati útmutató

Bionaire BFH261 Hősugárzó

Használati útmutató

Bionaire BFH251 Hősugárzó

Használati útmutató

Bionaire BOH1501W Hősugárzó

Használati útmutató

Bionaire BFH910 Hősugárzó

Használati útmutató

Bionaire BOH1503 Hősugárzó

Kapcsolódó kategóriák