Használati útmutató ABUS Smiley 3.0 ACE LED Kerékpáros sisak

Használati útmutató

5 6

3. Adjustement of the head ring

Almost all ABUS helmets are available in 2 sizes.

Adjusting the helmet to the individual head size

can be achieved, depending on the type, with the

following easy to use tting systems.

4. Adjustment of the straps

When wearing the helmet for the rst time, please adjust the straps so that they meet

tautly and comfortably beneath the ears.

The easily adjustable triangular locks (g. 1 + 2) on both sides, with their optional fastener

(g. 1) help you in doing so.

The child proof lock must be engaged properly, before rst use, with an audible “click” to

prevent accidental displacement.

Make sure the chin-guard, which must be locked before every ride, doesn’t lie on the

jaw-bone (g. 3 – 5).

Aer adjustment, the overlapping straps can be secured with the strap clip (g. 6).

Should the straps be too long, please cut them down to the required length and seal the

ends with a match ame to prevent fraying.

5. Proper maintenance and care

• Regularly check the helmet for signs of damage.

• Do not alter the specication of this helmet as it will reduce its protective eect.

• Do not apply stickers or paint to the helmet as this can be damaging to the materials.

• Do not remodel or misuse the helmet.

• Do not expose the helmet to temperatures in excess of 60˚C. Do not store behind glass,

e.g. in a car (burning glass eect), near heaters etc.

• If you suspect that the helmet has received a large impact, even if there is no visible

damage, please purchase a new helmet.

• This helmet has a limited service life and should be replaced when it shows obvious

signs of wear.

• Depending on the frequency of use and the specic operational conditions, a bicycle

helmet must be replaced 4 - 5 years aer the rst time it is used. In view of the unavoi-

dable material fatigue, the helmet must, however, be replaced at most 8 years aer its

production date even if it displays no clear visible or technical defects

• The helmet, inner pads and head ring can be cleaned using lukewarm water,

solvent-free detergents and a so cloth.

• The LED rear light does not replace the statutory lighting installation requirement

for bicycles.

• Only use original spare parts.

Battery instructions

• Do not use or store the product in areas where the temperature could reach below 0°C or

above +60°C. Do not expose the product to direct sunlight for long periods of time.

Smiley 3.0 LED:

• Keep batteries out of the reach of children. Children may put batteries in their mouths

and swallow them. This can cause serious harm to their health. Seek immediate medical

attention in this event!

• Risk of burns from contact with leaking or damaged batteries! In these cases, use

suitable protective gloves and clean the battery compartment with a dry cloth.

• Batteries must not be dismantled, punctured, damaged, short-circuited, heated,

charged or thrown into an open fire (risk of explosion!).

Smiley 3.0 ACE LED:

• This product contains a built-in 3,7 V lithium polymer battery (40mAh). Built-in

rechargeable batteries may only be replaced or removed by qualied personnel. Do not

charge or use the product in environments where there is a risk of explosion, e.g. from

ammable liquids, gases or dust. Never burn the product! The battery could explode in

the re. This would also release toxic substances.

• Only use a suitable standard micro USB B charging cable in conjunction with a suitable

charger (5V DC power supply unit) for charging!

• Do not leave the product unattended while it is charging!

Disposal

This product contains valuable raw materials. At the end of its service life, dispose of the

product in accordance with the applicable legal requirements.

Electrical appliances, rechargeable batteries and batteries must not be disposed of with

household waste. Disposal must be carried out in accordance with Directive 2012/19/EU on

waste electrical and electronic equipment (WEEE), or Directive 2006/66/EC on batteries and

accumulators and waste batteries and accumulators.

Please contact the local authority responsible for disposal if you have any queries. You can

obtain information on collection points for your old appliances, for example, from the local

municipal or city administration, the local waste disposal companies, or your specialist

dealer.

Dispose of the packaging according to type. Separate the cardboard, foil and plastic ele-

ments for recycling.

WEEE-Reg.-Nr. DE79663011

Értékelés

További információ erről a kézikönyvről

Megértjük, hogy jó, ha van egy papíralapú kézikönyv a ABUS Smiley 3.0 ACE LED Kerékpáros sisak-hoz. A kézikönyvet bármikor letöltheti weboldalunkról, és saját maga is kinyomtathatja. Ha szeretne egy eredeti kézikönyvet, javasoljuk, hogy lépjen kapcsolatba a következővel: ABUS. Esetleg tudnak adni egy eredeti kézikönyvet. Más nyelvű kézikönyvet keres ABUS Smiley 3.0 ACE LED Kerékpáros sisak készülékéhez? Válassza ki a kívánt nyelvet a honlapunkon, és keresse meg a modellszámot, hátha elérhető.

Műszaki adatok

ABUS Kerékpáros sisakok összes kézikönyve
Kerékpáros sisakok további kézikönyvei

Gyakran Ismételt Kérdések a következővel kapcsolatban: ABUS Smiley 3.0 ACE LED Kerékpáros sisak

Ügyfélszolgálati csapatunk keresi a hasznos termékinformációkat, és válaszol a gyakran ismételt kérdésekre. Amennyiben pontatlanságot talál a gyakran ismételt kérdésekben, a kapcsolatfelvételi űrlapon jelezze nekünk a hibát.

Kapcsolódó termékek

Használati útmutató

Abus Aventor Kerékpáros sisak

Használati útmutató

ABUS Smiley 3.0 ACE LED Pure Kerékpáros sisak

Használati útmutató

Abus YouDrop FF Kerékpáros sisak

Használati útmutató

Abus Purl-Y Ace Kerékpáros sisak

Használati útmutató

Abus Gamechanger Kerékpáros sisak

Használati útmutató

Abus Youn-I Ace Kerékpáros sisak

Használati útmutató

Abus Youn-I MISP Kerékpáros sisak

Használati útmutató

Abus PowerDome Kerékpáros sisak

Kapcsolódó kategóriák